Rad-8® Featuring Masimo SET® Measure-through Motion and
Low Perfusion™ Pulse Oximetry

 

Click here to receive more information about the Rad-8 >>

 

Features

  • > Simple, easy to use interface with one touch programming and large LED color display
  • > Compact, lightweight design for use in acute and alternate care settings, including long term care facilities, homecare, and sleep labs
  • > Sleep Mode easily configures system to perform bedside studies, with 2-second averaging
  • > Home Mode configures system for monitoring and trending at home
  • > RadNet® and RadLink® interface capability for multi-patient remote monitoring
  • > Signal IQ® (SIQ) indicator identifies conditions of low measurement confidence
  • > FastSat tracks rapid changes in arterial O2
  • > Adjustable averaging from 2 to 16 seconds
  • > Nurse call interface
  • > Up to 7 hours of internal battery life when fully charged
  • > 72 hours of trending memory
  • > Available in horizontal and vertical configurations
  • > Compatible with Philips Vuelink® device interface module
 
 
A: Signal I.Q.® (SIQ) bar is a signal quality indicator. The LED rises and falls with the pulse, its height indicating signal quality. When Signal IQ is low, the display turns red. B: The Alarm Status Indicator flashes when an alarm condition is present.
 
C: Perfusion Index (Pi) indicates arterial pulse signal strength. The Pi display is green when perfusion index is greater than or equal to 0.5 (left graphic) while the Pi display is red when perfusion index is less than 0.5.

 

One Touch Alarm Limits Access

 

Rad-8 Back Panel: Serial output to compatible devices and nurse call interface.
 

Caution: Federal (USA) law restricts this device to sale by or on the order of a physician. See instructions for use for full prescribing information, including indications, contraindications, warnings, and precautions.

PLCO-000939/PLM-10646A-0417